HP 302XL/F6U68AE Black



COMPATIBLE WITH


  • DeskJet 1110
  • DeskJet 2130
  • DeskJet 2132
  • DeskJet 2133
  • DeskJet 2134
  • DeskJet 3630
  • DeskJet 3632
  • DeskJet 3633
  • DeskJet 3634
  • DeskJet 3636
  • DeskJet 3637
  • DeskJet 3638
  • Envy 4513
  • Envy 4520
  • Envy 4521
  • Envy 4522
  • Envy 4523
  • Envy 4524
  • Envy 4525
  • Envy 4526
  • Envy 4527
  • Envy 4528
  • OfficeJet 3830
  • OfficeJet 3831
  • OfficeJet 3832
  • OfficeJet 3833
  • OfficeJet 3834
  • OfficeJet 3835
  • OfficeJet 4651
  • OfficeJet 4652
  • OfficeJet 4654
  • OfficeJet 4655
  • OfficeJet 4656
  • OfficeJet 4657
  • OfficeJet 4658

Troubleshooting - Click each question for details


Simply press the paper feed button. This will stop the lights flashing and you can continue printing as normal.

Was this answer helpful?

Your cartridge is not actually empty. It has been remanufactured and the ink levels cannot be reset. Follow these steps to restart your printing and continue printing until the print quality deteriorates.

Was this answer helpful?

Your cartridge is not actually empty. It has been remanufactured and the ink levels cannot be reset. Continue printing as normal until the print quality deteriorates.

Was this answer helpful?

The working parts of the printer and cartridge are delicate and need to be in the correct condition to function correctly. Sometimes a little dirt or ink can prevent the cartridge from working. Remove the cartridge from the printer and gently clean the gold coloured electrical contacts on the cartridge and the contacts on your printer with some moist tissue. Reinstall the cartridge and attempt to print again.

Was this answer helpful?

Unfortunately your cartridge has developed an electrical fault and will not work. Please return the cartridge to your store for a replacement.

Was this answer helpful?

There may be air trapped in your cartridge’s printhead. Please run a cleaning cycle according to your printer’s instructions and try to print again.

Was this answer helpful?

There may be a small blockage in your cartridge’s printhead. Remove the cartridge and try wiping the printhead from back to front a few times with a moist tissue. You should soon see a black line or a three colour line on the tissue. Reinstall the cartridge and attempt to print again.

Was this answer helpful?

First check to make sure that you have removed the clear clip from the cartridge before attempting installation. If yes, then make sure that your printer is listed in the ‘Compatible With’ section.

Was this answer helpful?